XE NÂNG ĐIỆN 3.0T-3.5T AC

Feature
Manufacturer`Name			安徽合力
Model Designation			CPD30	CPD35
Configuration number			CC1/CC2	CC1P/CC2
Rated capacity	Q	KG	3000	3000
Load center	C	mm	500	500
Power type			蓄电池/Battery
Operator type			座式/Seated
wheel base	y	mm	1685	1685
Wheels
Tyre type			Solid tires
Tyres Number (Front/Rear)			2/2	2/2
Tread(centre of tyre),feont	b10	mm	1000	1000
Tread(centre of tyre),read	b11	mm	950	950
Tyre size (front)			28×9-15-12PR	28×9-15
Tyre size,rear			18×7-8-14PR	18×7-8
SIZE
Load Distance	x	mm	485	490
Mast tilt angle, F/R	ɑ/β	(°)	6/10	6/10
Height with mast Lowered	h1	mm	2075	2180
Free lift	h2	mm	145	150
Standard lift height	h3	mm	3000	3000
Height with mast extended	h4	mm	4182	4177
Overhead guard height	h6	mm	2215	2215
Fork size T×W×L	s/e/l	mm	45x125x1070	50x125x1070
Fork Carriage to DIN 15173 A/B			3A	3A
Length to fork face	L2	mm	2485	2550
Overall Width	b1	mm	1225	1225
Outside turning radius	Wa	mm	2210	2270
Ground Clearance at mast,loaded	m1	mm	135	135
Ground Clearance at centre of wheelbase,loaded	m2	mm	150	150
Right stack aisle width (pallet size 1000x1000mm,clearance:200mm	Ast	mm	3965	4030
Right stack aisle width (pallet size 1200x1200mm,clearance:200mm	Ast	mm	4095	4160
PERFORMANCE
Travelling speed,with/without load	km	h	15.0/15.5	14.5/15.0
Lifting speed, with/without load	mm	s	280/450	250/440
Lifting speed, with/without load	mm	s	340/460	325/450
Lowering speed	mm	s	500	500
Gradien performance with load		%	15	12
Max.draw bar pull with load		N	15600	17500
Accelerration time (10 metres)W/O load		s	5.0/4.7	5.2/4.9
WEIGHT
Total weight (with/without battery)		kg	4810/3230	5500/3920
Axle load: unloaded, front/rear		kg	2320/2490	2640/2860
Axle load: loaded,front/rear		kg	7055/755	8145/855
Battery
Battery voltage/rated capacity(5h)		V/Ah	80/480	80/480
Battery weight		kg	1580	1580
Battery to DIN 43531/35/36/A/B/C			43536A	43536A
Motor and controller
Drive motor – 60 Min.Rating		kW	16.6(AC)
Pump motor – 15 Min.Rating		kW	13.0(DC)
Pump motor – 15 Min.Rating		kW	13.5(AC)
Drive motor Control Method			MOSFET/AC MOS管/交流
Pump motor Control Method			MOSFET/DC MOS管/直流
Pump motor Control Method			MOSFET/AC MOS管/交流
Service Brake/Parking Brake			Hydraulic/Mechanial
Relief Pressure		Mpa	21	21

Compare

Add to wishlist

SKU: 12357 Category: Xe nâng điện Tags: Electric_forklift 3_0T-3_5T AC, gia xe nang, xe nâng, xe nâng chất lượng, xe nang chl, xe nang dau, xe nang dien heli, xe nang hang gia re, xe nang heli, xe nang trung quoc, xenang

Description
Shipping & Delivery

Description

Đặc tính
Nhà sản xuất			安徽合力
Model			CPD30	CPD35
Số cấu hình			CC1/CC2	CC1P/CC2
Sức nâng	Q	KG	3000	3000
Trọng tâm nâng	C	mm	500	500
Phương thức hoạt động			蓄电池/Battery
Phương thứclái			座式/Seated
Khoảng cách trục	y	mm	1685	1685
Bánh xe
Loại bánh xe ( trước sau )			Bánh xe đặc ruột
Số lượng bánh xe			2/2	2/2
Truc truớc	b10	mm	1000	1000
Truc sau	b11	mm	950	950
Bánh trước			28×9-15-12PR	28×9-15
Bánh sau			18×7-8-14PR	18×7-8
Kích thước
Khoảng cách tải	x	mm	485	490
Độ nghiêng cột nâng, trước sau	ɑ/β	(°)	6/10	6/10
Độ cao tĩnh của cột nâng	h1	mm	2075	2180
Độ cao nâng tự do	h2	mm	145	150
Độ cao nâng cao nhất	h3	mm	3000	3000
Độ cao cao nhất khi làm việc	h4	mm	4182	4177
Độ cao đỉnh giá	h6	mm	2215	2215
kích thước càng nâng	s/e/l	mm	45x125x1070	50x125x1070
Giá càng nâng ISO 2328			3A	3A
Chiều dài xe ( ko càng nâng )	L2	mm	2485	2550
Chiều rộng xe	b1	mm	1225	1225
Bán kính quay xe	Wa	mm	2210	2270
Khoảng cách cột nâng và mặt đất	m1	mm	135	135
Khoảng cách trục trọng tâm và mặt đất	m2	mm	150	150
Khoảng cách tối thiểu đường đi khi nâng hàng	Ast	mm	3965	4030
Khoảng cách tối thiểu đường đi khi nâng hàng	Ast	mm	4095	4160
Tính năng
Tốc độ di chuyển (đầy tải / không tải)	km	h	15.0/15.5	14.5/15.0
Tốc độ nâng lên (đầy tải / không tải)	mm	s	280/450	250/440
Tốc độ nâng lên (đầy tải / không tải)	mm	s	340/460	325/450
Tốc độ hạ xuống	mm	s	500	500
Lực leo dốc (đầy tải)		%	15	12
Lực kéo tối đa (đầy tải)		N	15600	17500
Tăng tốc 10m (đầy tải / không tải)		s	5.0/4.7	5.2/4.9
Trọng lượng
Tổng trọng lượng ( gồm / ko gồm bình điện)		kg	4810/3230	5500/3920
Trọng lượng đầy tải (trước / sau)		kg	2320/2490	2640/2860
Trọng lượng không tải (trước / sau)		kg	7055/755	8145/855
Bình điện
Bình điện		V/Ah	80/480	80/480
Trọng lượng bình điện		kg	1580	1580
Kích thước bình điện			43536A	43536A
Động cơ và bộ điều khiển
Drive motor power-60 minutes		kW	16.6(AC)
Nâng công suất động cơ-15 phút		kW	13.0(DC)
Nâng công suất động cơ-15 phút		kW	13.5(AC)
Chế độ động cơ điều khiển			MOSFET/AC MOS管/交流
Pump motor Control Method			MOSFET/DC MOS管/直流
Pump motor Control Method			MOSFET/AC MOS管/交流
Phanh dịch vụ / phanh đỗ xe			Hydraulic/Mechanial
Relief Pressure		Mpa	21	21

Shipping & Delivery

Feature
Model		CBD15
Configuration No.		170J
load capacity	kg	1500
Load center	mm	600
wheel base	mm	1301
operating type		Đi lái / Walkie
Wheels
wheel type		PU
Wheel quantity Driving wheel Balance wheel/Bearing wheel		1/0/4
Driving wheel size	mm	¢ 252 * 67
Bearing wheel size	mm	¢ 84×70 ( Double wheels)
Balance wheelsize	mm	-
Dimension
Max.fork lowered height	mm	85
Max.fork lifting height	mm	205
Max.lifting height	mm	120
Overall fork width	mm	550/685
Inside width between forks	mm	230/365
Fork length	mm	1150/1200
Fork width	mm	160
Fork thickness	mm	55
Overall length	mm	1707
Overall width	mm	697
Overall height(With handle)	mm	1181
Overall height(Without handle)	mm	714
Min.Turning radius	mm	1547
Min.Aisle width for pallets 800×1200	mm	1920
Min.Aisle width for pallets 1000×1200	mm	1953
Performance
Travel speed,laden/unladen	km/h	3/3.5
Lift speed,laden/unladen	mm/s	56/60
Lowering speed,laden/unladen	mm/s	57/59
Gradeability,laden/unladen	%	5/7
Electrical configuration
Drive motor	KW	DC 0.63
Lift motor	KW	DC 0.8
Battery voltage/capacity	V/Ah	24/70
Brake		Electromagnetic/Regenerative
Controller		HELI ( CURTIS)
Weight
Battery weight	kg	48
Service weight with battery	kg	275

Feature
Model		CBD20
Configuration No.		410
Load capacity	kg	2000
Load center	mm	600
Wheel base	mm	1407
Operating type		Stand On
Wheels
Wheel type		PU
Wheel quantity Driving wheel /Balance wheel/Bearing wheel		1/1/4
Driving wheel size	mm	¢228 x 75
Bearing wheel size	mm	¢84 x 80 (Double wheels)
Balance wheel size	mm	¢140 x 60
Dimension
Min.fork lowered height	mm	85
Max.fork lifting height	mm	210
Max.lifting height	mm	125
Overall width	mm	550/600/650/685
Inside width between forks	mm	220/270/320/355
Fork length	mm	1150/1200
Fork width	mm	165
Fork thickness	mm	55
Overall length	mm	1874/2247
Overall width	mm	725
Overall height(With handle)	mm	1475
Overall height(Without handle)	mm	940
Min.Turning radius	mm	1680/2060
Min.Aisle width for pallets 800×1200	mm	2000/2320
Min.Aisle width for pallets 1000×1200	mm	2030/2340
Performance
Travel speed,laden/unladen	km/h	6/6
Lift speed,laden/unladen	mm/s	20/25
Lowering speed,laden/unladen	mm/s	40/30
Gradeability,laden/unladen	%	5/7
Electrical configuration
Drive motor	KW	AC 1.5
Lift motor	KW	DC 1.2
Steering motor	KW	-
Battery voltage/capacity	V/Ah	24/210
Brake		Electromagnetic/Regenerative
Controller		CURTIS
Weight
Battery weight	kg	190
Service weight with battery	kg	710

MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS
CHARACTER
Manufacturer			ANHUI HELI CO., LTD
Model			CPC20	CPCD20	CPC25	CPCD25	CPC30	CPCD30	CPC35	CPCD35	CPCD38
Power unit			Diesel
Rated Capacity		kg	2000		2500		3000		3500		3800
Load Center		mm	500
Operation			Driver Seated
SIZE
max.lifting heigh	h3	mm	3000		3000		3000		3000		3000
height mast retracted (upright)	h1	mm	1995		1995		2070		2180
overall max.lifting height (with backrest)	h4	mm	4030		4030		4262		4262
free lift height	h2	mm	170		170		160		170		150
overall height (overhead guard)	h6	mm	2070		2070		2090		2090		2195
min.ground clearance under mast	m1	mm	110		110		135		135
overhead guard clearance (from face of seat)	h7	mm	1000
coupler height	h5	mm	290		290		310		310
backrest height (from upper face of forks	h8	mm	995		995		1227		1222
overall length (without forks)	(L1/L2)	mm	3422/2502		3646/2576		3752/2682		3763/2693		3954/2884
wheel base	L5	mm	1600		1600		1700		1700		1900
front overhang	X	mm	477		477		479		498		498
rear overhang	L4	mm	420		494		495		495		495
overall width	B	mm	1170		1170		1225		1225
tread (front/rear)	(S/P)	mm	970/970		970/970		1000/970		1000/970		1000/970
lateral fork adjustment outside of fork (max./min.)	R	mm	1030/244		1030/244		1060/250		1060/250
outside turning radius	V	mm	2170		2240		2400		2420
Inside turning radius	Wa	mm	160		160		200		200
min.intersecting aisle	Ra	mm	2200		2200		2380		2400
tilting angles (forward)	α/β	%	6° / 12°
fork dimensions (axbxc)	a x b x c	mm	920x122x40		1070x122x40		1070x125x45		1070x125x50		1070x125x50
PERFORMANCE
max.traveling speeds (with/without load)		Km/h	17/19		17/19		18/19		19/19
lifting speeds (with/without load		mm/s	530/550		530/550		440/480		330/370
lowering speeds(with/without load)		mm/s	450/550		450/550		450/500		350/400
max.draw-bar pull,(with/without load)		kN	20/15	21/15	20/15.2	21/15.2	20/16	21/16	20/16.3	21/16.3
max.negotiable gradient(without load)		%	21/20	27/20	18/20	23/20	20/20	20/20	15/20	10.5/20
WEIGHT
service mass		kg	3320		3680		4270		4700		4850
load wheel with load(front/rear)		kg	4788/532		5562/618		6543/727		7380/820
load wheel without load(front/rear)		kg	1328/1992		1472/2208		1708/2562		1880/2820
WHEEL AND TYRE
wheels number front/rear(x=driven)		2X/2
Tyre type		实心轮胎
Tyre sive		7.00-12- /6.00-9					28x9-15 /6.50-10
Service Brake		Hydraulic-Foot Pedal / 液压-踏板式
Paking Brake		Mechanical-Hand Lever / 机械-手动式
DRIVE AND CONTROL DEVICE
Battery (Voltage/Capacity)	V/Ah	12/80					12/80
Internal Combustion Engine Model		Mitsubisi S4S					DA CHAI CA498-97
Internal Combustion Engine Rated Output	kW/rpm	35.3KW/2250rpm					45KW/2500rpm
Internal Combustion Engine Rated Torque	Nm/rpm	177Nm/1700rpm					170~180Nm/1600~1800rpm
Internal Combustion Engine Number of Cylinder		4-94					4-98
Internal Combustion Engine Displacement	L	120mm/3.331 L					105/3.168 L
Transmission Number of Speed Fwd/Bwd type		自动 Tự động / 手动 số sàn					自动 Tự động / 手动 số sàn

MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS
CHARACTER
Manufacturer			ANHUI HELI CO., LTD
Model			CPCD40-M2	CPCD45-M2	CPCD50-M2
Power type			Diesel
Rated Capacity		kg	4000	4500	5000
Load Center		mm	500
Driving mode			Driver Seated
SIZE
Mast height, extended (with backrest,unloaded)	H	mm	4250
max. Fork height	H1	mm	3000
mast height,lowered	H2	mm	2275
free lift	H4	mm	150
backrest height (from the fork surface	H3	mm	1250
Overhead guard cleanrance ( from face of seat )	H6	mm	1020
overall height (overall height)	H8	mm	*2350/2270/2230
overall length (fork/without fork)	L/L`	mm	4140/3080	4170/3100	4364/3144
Front overhang	L2	mm	560
Rear overhang	L4	mm	520	540	584
Wheel base	L3	mm	2000
Couper height	H7	mm	380
min.ground clearance under mast	H5	mm	175
overall Width	W1	mm	1480
Fork dimensions (external)(max./min.)	W2	mm	1340/300
tread (front tread/rear tread)	W3/W4	mm	1180/1190
Min.Turning radius (inside)	r'	mm	220
Min.Turning radius (outside)	r	mm	2720	2740	2800
min.Right angle angle aisle width	Ra	mm	2480	2500	2550
Mast tilting angle (feont/rear)	α/β	%	6° / 12°
Fork size	L1xWxT	mm	1070x150x50
PERFORMANCE
max.traveling speed (loaded/unloaded)		Km/h	24/25
lifting speeds (loaded/unloaded)		mm/s	460/520
lowering speeds(loaded/ unloaded)		mm/s	300 < < 600
max.Draw bar (loaded/unloaded)		kN	30/18
max.Gradeability(loaded/unloaded)		%	20/20
WEIGHT
service weight		kg	6310	6510	6760
Weight distribution loaded(front/rear)		kg	8925/1575	9750/1550	10500/1600
Weight distribution unloaded (front/rear)		kg	2700/3800	2710/4090	2680/4420
WHEEL AND TYRE
Tyre number ×=drive wheel (front/rear)			2X/2
Tyre type (front/rear)			Solid tires
Tyre size (front/rear)			8.25-15 / 7.00-12		300-15 / 7.00-12
Double tyre size (front/rear)			8.25-15 / 7.00-12
Service Brake			Hydraulic-foot pedal
Paking Brake			Mechanical-hand brake lever type
DRIVE AND CONTROL DEVICE
Battery (Voltage/Capacity)	V/Ah	24/80
Engine manufacturer /model		Xi Chai -- CA4110		Mitsubishi S6S-230
engine rated power	kW/rpm	61/2200		52/2300
engine rated torque	Nm/rpm	305/1400~1600		248/1700
Engine cylinder (number-bore ×stoke)		4-110 x 125		6-94×120
engine displacement	L	4.752		4.966
Engine fuel tank capacity	L	90
Gear number (front/rear)		2-1 powered shift

MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS
CHARACTER
Manufacturer			ANHUI HELI CO., LTD
Model			CPCD80	CPCD100	CPCD80	CPCD100
Power unit			Diesel
Rated Capacity		kg	8000	10000	80000	10000
Load Center		mm	600
Operation			Driver Seated
SIZE
overall max.lifting height (with backrest)	h4	mm	4360	4085	4360	4085
max.lifting height	h3	mm	3000
height mast retracted(upright)	h1	mm	2700	2850	2700	2850
free lift height	h2	mm	200
backrest height (from upper face of forks)	h8	mm	1360	1015	1360	1015
Overhead Guard clearance(from face of seat)	h7	mm	1120
overall height (overhead guard)	h6	mm	2560	2560	2560	2560
overall length (with fork)	L1	mm	5160	5480	5160	4260
overall length (without fork)	L2	mm	3940	4260	3940	718
Front overhang	X	mm	700	718	700	718
Rear overhang	L4	mm	740	740	740	740
Wheel base	L5	mm	2500	2800	2500	2800
Coupler height	h5	mm	540	540	540	540
Min.ground clearance under mast	m1	mm	245	245	245	245
Overall width	B	mm	2165	2165	2165	2165
Lateral fork adjustment outside of fork(Max./Min.)	R	mm	2000/340	2140/410	2000/340	2140/410
Tread(front)	S	mm	1600	1600	1600	1600
Read(rear)	P	mm	1700	1700	1700	1700
Outside turning radius	Wa	mm	3700	3900	3700	3900
Inside turning radius	V	mm	200	200	200	200
Min.intersecting aisle	Ra	mm	3310	3540	3310	3540
Tilting angles(forward/backward)	α/β	%	6° / 12°
Fork dimensions(axbxc)		mm	70×1220×170	80×1220×175	70×1220×170	80×1220×175
PERFORMANCE
max.traveling speeds(With/Without load)		Km/h	26/30	26/30	26/28	26/30
lifting speeds (With/Without load)		mm/s	440/470	360/380	400/440	330/370
lowering speeds (With/Without load)		mm/s	≤600/≥300
Max.Draw-bar pull,With load		kN	60	58	59	57
max.Negotiable Gradient (With/Without load)		%	27/20	22/20	25/20	21/20
WEIGHT
service Mass		kg	10960	12510	10960	12510
Load Wheel with load(Front/Rear)		kg	17000/1960	20380/2130	17000/1960	20380/2130
Load Wheel without load(Front/Rear)		kg	4840/6120	5700/6810	4840/6120	5700/6810
WHEEL AND TYRE
Wheels number front/Rear (x=driven)			4x/2
Tyre Type			Solid tires
Tyre sive (front)			9.00-20
Tyre sive (rear)			9.00-20
Service Brake			Hydraulic-Foot Pedal		Hydraulic-Foot Pedal
Paking Brake			MECHANICAL-HAND BRAKE ROD		MECHANICAL-HAND BRAKE ROD
DRIVE AND CONTROL DEVICE
Battery (Voltage/Capacity)	V/Ah		2x12/80
Internal Combustion Engine Model			ISUZU A-6BG1QC-02		XI CHAI -- CA6110
engine type			Động cơ dầu
Internal Combustion Engine Rated Output	kW/rpm		82/2000		83/2000
Internal Combustion Engine Rated Torque	Nm/rpm		415/1400-1600		450/1400-1500
Internal Combustion Engine Number of Cylinder			6-105*125		6
Internal Combustion Engine Displanment	L		6.494		7.127
Internal Combustion Engine Fuel Tank Capacity	L		140
Transmission Number of Speed Fwd/Bwd			2/2- số tự động

XE NÂNG ĐIỆN 3.0T-3.5T AC

NÂNG HÀNG PALLET CBD15-170J

NÂNG HÀNG PALLET CBD20-460

XE NÂNG DẦU 2.0T-3.5T

XE NÂNG DẦU 4.0T-5.0T

XE NÂNG DẦU 8T-10T

XE NÂNG ĐIỆN CDD06-970

XE NÂNG ĐIỆN CDD10-050

XE NÂNG ĐIỆN CQDH13 14-850

XE NÂNG ĐIỆN 3.0T-3.5T AC

Related products