Hệ thống ghế hơi điều khiển, tay vô-lăng trợ lực, cơ cấu khóa cầu an toàn, tay trang điều khiển 1 cần, thiết kế tối ưu nhất từ phía nhà sản xuất Laigong tạo cho người ngồi 1 khoảng không thoải mái và quan sát được nhiều hướng khác nhau
XE XÚC LẬT HL933II
Steering wheel system, steering wheel, power steering, safety lock, hand control 1 need, most optimal design from the manufacturer Laigong to make people sit uncomfortable and optimistic. There are many different directions
Description
Shipping & Delivery
Related products
XE NÂNG DẦU 1.0T-1.8T
| MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | ||||||||
| CHARACTER | ||||||||
| Manufacturer | ANHUI HELI CO., LTD | |||||||
| Model | CPC10 | CPCD10 | CPC15 | CPCD15 | CPC18 | CPCD18 | ||
| Power unit | Diesel | |||||||
| Rated Capacity | kg | 1000 | 1500 | 1750 | ||||
| Load Center | mm | 500 | ||||||
| Operation | Driver Seated | |||||||
| SIZE | ||||||||
| overall max.lifting height (with backrest) | h4 | mm | 4030 | 4030 | 4030 | |||
| max.lifting heigh | h3 | mm | 3000 | |||||
| height mast retracted (upright) | h1 | mm | 1995 | 1995 | 1995 | |||
| free lift height | h2 | mm | 152 | 155 | 155 | |||
| backrest height (from upper face of forks | h8 | mm | 1008 | 1005 | 1005 | |||
| overhead guard clearance (from face of seat) | h7 | mm | 1025 | |||||
| overall height (overhead guard) | h6 | mm | 2070 | 2070 | 2070 | |||
| overall length (with forks) | L1 | mm | 2941 | 3165 | 3213 | |||
| overall length (without forks) | L2 | mm | 2171 | 2245 | 2293 | |||
| front overhang | X | mm | 418 | 421 | 465 | |||
| rear overhang | L4 | mm | 350 | 420 | 465 | |||
| wheel base | L5 | mm | 1400 | 1400 | 1400 | |||
| coupler height | H5 | mm | 250 | 250 | 250 | |||
| min.ground clearance under mast | m1 | mm | 110 | 110 | 110 | |||
| overall width | B | mm | 1070 | 1070 | 1070 | |||
| lateral fork adjustment outside of fork (max./min.) | S | mm | 950/200 | |||||
| tread (front) | R | mm | 890 | 890 | 920 | |||
| tread (rear) | P | mm | 920 | 920 | 920 | |||
| outside turning radius | Wa | mm | 1880 | 1955 | 1985 | |||
| Inside turning radius | V | mm | 110 | 110 | 95 | |||
| min.intersecting aisle | Ra | mm | 1977 | 2052 | 2093 | |||
| tilting angles (forward) | α/β | 6° / 12° | ||||||
| fork dimensions (axbxc) | mm | 770x100x32 | 920x100x35 | 920x100x35 | ||||
| PERFORMANCE | ||||||||
| max.traveling speeds (with/without load) | Km/h | 13.5/14.5 | ||||||
| lifting speeds (with/without load | mm/s | 590/650 | ||||||
| lowering speeds(with/without load) | mm/s | 450/550 | ||||||
| max.draw-bar pull,(with/without load) | kN | 12.3/7 | 18/7 | 12.3/7 | 18/7 | 12.3/7 | 18/7 | |
| max.negotiable gradient(without load) | % | ≥20 | ||||||
| WEIGHT | ||||||||
| service mass | kg | 2220 | 2660 | 2890 | ||||
| load wheel with load(front/rear) | kg | 2830/390 | 3640/520 | 4040/600 | ||||
| load wheel without load(front/rear) | kg | 1220/1000 | 1170/1490 | 1140/1750 | ||||
| WHEEL AND TYRE | ||||||||
| wheels number front/rear(x=driven) | 2X/2 | |||||||
| Tyre type | Solid tires | |||||||
| Tyre sive(front) | 6.50-10 | |||||||
| Tyre sive(rear) | 5.00-8 | |||||||
| Service Brake | Hydraulic-Foot Pedal / 液压-踏板式 | |||||||
| Paking Brake | Mechanical-Hand Lever / 机械-手动式 | |||||||
| DRIVE AND CONTROL DEVICE | ||||||||
| Battery (Voltage/Capacity) | V/Ah | 12/80 | ||||||
| Internal Combustion Engine Model | ISUZU C240PKJ | |||||||
| Internal Combustion Engine Rated Output | kW/rpm | 35.4/2500 | ||||||
| Internal Combustion Engine Rated Torque | Nm/rpm | 139.9/1800 | ||||||
| Internal Combustion Engine Number of Cylinder | 4-86×102 | |||||||
| Internal Combustion Engine Displacement | L | 2.369 | ||||||
| Internal Combustion Engine Fuel Tank Capacity | L | 38 | ||||||
| Transmission Number of Speed Fwd/Bwd type | 1-1Power Shift Shift Shift T/M,2-2 Manual Shift T/M | |||||||
XE NÂNG DẦU 4.0T-5.0T
| MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | |||||
| CHARACTER | |||||
| Manufacturer | ANHUI HELI CO., LTD | ||||
| Model | CPCD40-M2 | CPCD45-M2 | CPCD50-M2 | ||
| Power type | Diesel | ||||
| Rated Capacity | kg | 4000 | 4500 | 5000 | |
| Load Center | mm | 500 | |||
| Driving mode | Driver Seated | ||||
| SIZE | |||||
| Mast height, extended (with backrest,unloaded) | H | mm | 4250 | ||
| max. Fork height | H1 | mm | 3000 | ||
| mast height,lowered | H2 | mm | 2275 | ||
| free lift | H4 | mm | 150 | ||
| backrest height (from the fork surface | H3 | mm | 1250 | ||
| Overhead guard cleanrance ( from face of seat ) | H6 | mm | 1020 | ||
| overall height (overall height) | H8 | mm | *2350/2270/2230 | ||
| overall length (fork/without fork) | L/L` | mm | 4140/3080 | 4170/3100 | 4364/3144 |
| Front overhang | L2 | mm | 560 | ||
| Rear overhang | L4 | mm | 520 | 540 | 584 |
| Wheel base | L3 | mm | 2000 | ||
| Couper height | H7 | mm | 380 | ||
| min.ground clearance under mast | H5 | mm | 175 | ||
| overall Width | W1 | mm | 1480 | ||
| Fork dimensions (external)(max./min.) | W2 | mm | 1340/300 | ||
| tread (front tread/rear tread) | W3/W4 | mm | 1180/1190 | ||
| Min.Turning radius (inside) | r' | mm | 220 | ||
| Min.Turning radius (outside) | r | mm | 2720 | 2740 | 2800 |
| min.Right angle angle aisle width | Ra | mm | 2480 | 2500 | 2550 |
| Mast tilting angle (feont/rear) | α/β | % | 6° / 12° | ||
| Fork size | L1xWxT | mm | 1070x150x50 | ||
| PERFORMANCE | |||||
| max.traveling speed (loaded/unloaded) | Km/h | 24/25 | |||
| lifting speeds (loaded/unloaded) | mm/s | 460/520 | |||
| lowering speeds(loaded/ unloaded) | mm/s | 300 < < 600 | |||
| max.Draw bar (loaded/unloaded) | kN | 30/18 | |||
| max.Gradeability(loaded/unloaded) | % | 20/20 | |||
| WEIGHT | |||||
| service weight | kg | 6310 | 6510 | 6760 | |
| Weight distribution loaded(front/rear) | kg | 8925/1575 | 9750/1550 | 10500/1600 | |
| Weight distribution unloaded (front/rear) | kg | 2700/3800 | 2710/4090 | 2680/4420 | |
| WHEEL AND TYRE | |||||
| Tyre number ×=drive wheel (front/rear) | 2X/2 | ||||
| Tyre type (front/rear) | Solid tires | ||||
| Tyre size (front/rear) | 8.25-15 / 7.00-12 | 300-15 / 7.00-12 | |||
| Double tyre size (front/rear) | 8.25-15 / 7.00-12 | ||||
| Service Brake | Hydraulic-foot pedal | ||||
| Paking Brake | Mechanical-hand brake lever type | ||||
| DRIVE AND CONTROL DEVICE | |||||
| Battery (Voltage/Capacity) | V/Ah | 24/80 | |||
| Engine manufacturer /model | Xi Chai -- CA4110 | Mitsubishi S6S-230 | |||
| engine rated power | kW/rpm | 61/2200 | 52/2300 | ||
| engine rated torque | Nm/rpm | 305/1400~1600 | 248/1700 | ||
| Engine cylinder (number-bore ×stoke) | 4-110 x 125 | 6-94×120 | |||
| engine displacement | L | 4.752 | 4.966 | ||
| Engine fuel tank capacity | L | 90 | |||
| Gear number (front/rear) | 2-1 powered shift | ||||
XE NÂNG DẦU 5.0T-7.5T
| MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | ||||||
| CHARACTER | ||||||
| Manufactory | ANHUI HELI CO., LTD | |||||
| Model | CPCD50 | CPCD60 | CPCD70 | CPCD75 | ||
| Type | Diesel | |||||
| Capacity | kg | 5000 | 6000 | 7000 | 7500 | |
| Load Center | mm | 600 | ||||
| Driving mode | Driver Seated | |||||
| SIZE | ||||||
| overall max.lifting height (with backrest) | h4 | mm | 4420 | 4420 | 4420 | 4290 |
| max. Fork height | h3 | mm | 3000 | |||
| height mast retracted(upright) | h1 | mm | 2500 | 2500 | 2500 | 2567 |
| free lift height | h2 | mm | 200 | 267 | ||
| backrest height (from upper face of forks) | h8 | mm | 1365 | |||
| Overhead Guard clearance(from face of seat) | h7 | mm | 1120 | |||
| overall height (overhead guard) | h6 | mm | 2450 | 2450 | 2450 | 2510 |
| overall length (with fork) | L1 | mm | 4625 | 4695 | 4770 | 4965 |
| overall length (without fork) | L2 | mm | 3405 | 3475 | 3550 | 655 |
| Front overhang | X | mm | 590 | 590 | 590 | 655 |
| Rear overhang | L4xWxT | mm | 565 | 635 | 710 | 840 |
| Wheel base | L5 | mm | 2250 | 2250 | 2250 | 2250 |
| Coupler height | h5 | mm | 430 | 430 | 430 | 430 |
| Min.ground clearance under mast | m1 | mm | 200 | 200 | 200 | 250 |
| Overall width | B | mm | 1995 | 1995 | 1995 | 1995 |
| Lateral fork adjustment(Outside of fork) | R | mm | 1845/300 | 1845/300 | 1845/300 | 1440/300 |
| Front thread | S | mm | 1470 | 1470 | 1470 | 1500 |
| Rear thread | P | mm | 1700 | 1700 | 1700 | 1500 |
| Inside turning radius | Wa | mm | 3250 | 3300 | 3360 | 3425 |
| Outside turning radius | V | mm | 200 | 200 | 200 | 200 |
| Min.intersecting aisle | Ra | mm | 2960 | 3000 | 3040 | 3240 |
| Tilting angles(forward/backward) | α/β | % | 6° / 12° | |||
| Fork size a×b×c | mm | 55x1220x150 | 60x1220x150 | 65x1220x150 | 70x1220x150 | |
| PERFORMANCE | ||||||
| max.traveing speeds (laden/unladen) | Km/h | 26/28 | 26/28 | 26/28 | 24/29 | |
| lifting speeds (laden/unladen) | mm/s | 550/580 | 550/580 | 480/560 | 430/480 | |
| lowering speeds (laden/unladen) | mm/s | ≤600/≥300 | ||||
| Max.Draw-bar pull (laden/unladen) | kN | 54 | 54 | 54 | 54 | |
| max.Negotiable Gradient (laden/unladen) | % | 35/20 | 32/20 | 30/20 | 25/20 | |
| WEIGHT | ||||||
| service Mass | kg | 7980 | 8570 | 9170 | 10050 | |
| Load Wheel.laden(Front/Rear) | kg | 11660/1320 | 12990/1580 | 14420/1750 | 13800/3750 | |
| Load Wheel.unladen(Front/Rear) | kg | 4010/3970 | 3850/4720 | 3780/5390 | 2710/7340 | |
| WHEEL AND TYRE | ||||||
| Wheel (Front/Rear) X=Driving Wheel | 4x/2 | |||||
| Tyre (front/rear) | Solid tires | |||||
| Tyre sive (front) | 4-8.25-15 | |||||
| Tyre sive (rear) | 2-8.25-15 | |||||
| Service Brake | Power brake-pedal tyre | |||||
| Paking Brake | Mechanical-hand braking rod type | |||||
| DRIVE AND CONTROL DEVICE | ||||||
| Battery Voltage/Capacity | V/Ah | 2x12/80 | ||||
| Internal Combustion Engine Model | ISUZU A-6BG1QC-02 | XI CHAI -- CA6110 | ||||
| engine type | Động cơ dầu | |||||
| Internal Combustion Engine Rated Output | kW/rpm | 82/2000 | 83/2000 | |||
| Internal Combustion Engine Rated Torque | Nm/rpm | 415/1400-1600 | 450/1400-1500 | |||
| Internal Combustion Engine Number of Cylinder | 6-105*125 | 6 | ||||
| Internal Combustion Engine Displanment | L | 6.494 | 7.127 | |||
| Internal Combustion Engine Fuel Tank Capacity | L | 140 | ||||
| Transmission Number of Speed Fwd/Bwd type | 2/2- số tự động | |||||
XE NÂNG DẦU 8T-10T
| MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | ||||||
| CHARACTER | ||||||
| Manufacturer | ANHUI HELI CO., LTD | |||||
| Model | CPCD80 | CPCD100 | CPCD80 | CPCD100 | ||
| Power unit | Diesel | |||||
| Rated Capacity | kg | 8000 | 10000 | 80000 | 10000 | |
| Load Center | mm | 600 | ||||
| Operation | Driver Seated | |||||
| SIZE | ||||||
| overall max.lifting height (with backrest) | h4 | mm | 4360 | 4085 | 4360 | 4085 |
| max.lifting height | h3 | mm | 3000 | |||
| height mast retracted(upright) | h1 | mm | 2700 | 2850 | 2700 | 2850 |
| free lift height | h2 | mm | 200 | |||
| backrest height (from upper face of forks) | h8 | mm | 1360 | 1015 | 1360 | 1015 |
| Overhead Guard clearance(from face of seat) | h7 | mm | 1120 | |||
| overall height (overhead guard) | h6 | mm | 2560 | 2560 | 2560 | 2560 |
| overall length (with fork) | L1 | mm | 5160 | 5480 | 5160 | 4260 |
| overall length (without fork) | L2 | mm | 3940 | 4260 | 3940 | 718 |
| Front overhang | X | mm | 700 | 718 | 700 | 718 |
| Rear overhang | L4 | mm | 740 | 740 | 740 | 740 |
| Wheel base | L5 | mm | 2500 | 2800 | 2500 | 2800 |
| Coupler height | h5 | mm | 540 | 540 | 540 | 540 |
| Min.ground clearance under mast | m1 | mm | 245 | 245 | 245 | 245 |
| Overall width | B | mm | 2165 | 2165 | 2165 | 2165 |
| Lateral fork adjustment outside of fork(Max./Min.) | R | mm | 2000/340 | 2140/410 | 2000/340 | 2140/410 |
| Tread(front) | S | mm | 1600 | 1600 | 1600 | 1600 |
| Read(rear) | P | mm | 1700 | 1700 | 1700 | 1700 |
| Outside turning radius | Wa | mm | 3700 | 3900 | 3700 | 3900 |
| Inside turning radius | V | mm | 200 | 200 | 200 | 200 |
| Min.intersecting aisle | Ra | mm | 3310 | 3540 | 3310 | 3540 |
| Tilting angles(forward/backward) | α/β | % | 6° / 12° | |||
| Fork dimensions(axbxc) | mm | 70×1220×170 | 80×1220×175 | 70×1220×170 | 80×1220×175 | |
| PERFORMANCE | ||||||
| max.traveling speeds(With/Without load) | Km/h | 26/30 | 26/30 | 26/28 | 26/30 | |
| lifting speeds (With/Without load) | mm/s | 440/470 | 360/380 | 400/440 | 330/370 | |
| lowering speeds (With/Without load) | mm/s | ≤600/≥300 | ||||
| Max.Draw-bar pull,With load | kN | 60 | 58 | 59 | 57 | |
| max.Negotiable Gradient (With/Without load) | % | 27/20 | 22/20 | 25/20 | 21/20 | |
| WEIGHT | ||||||
| service Mass | kg | 10960 | 12510 | 10960 | 12510 | |
| Load Wheel with load(Front/Rear) | kg | 17000/1960 | 20380/2130 | 17000/1960 | 20380/2130 | |
| Load Wheel without load(Front/Rear) | kg | 4840/6120 | 5700/6810 | 4840/6120 | 5700/6810 | |
| WHEEL AND TYRE | ||||||
| Wheels number front/Rear (x=driven) | 4x/2 | |||||
| Tyre Type | Solid tires | |||||
| Tyre sive (front) | 9.00-20 | |||||
| Tyre sive (rear) | 9.00-20 | |||||
| Service Brake | Hydraulic-Foot Pedal | Hydraulic-Foot Pedal | ||||
| Paking Brake | MECHANICAL-HAND BRAKE ROD | MECHANICAL-HAND BRAKE ROD | ||||
| DRIVE AND CONTROL DEVICE | ||||||
| Battery (Voltage/Capacity) | V/Ah | 2x12/80 | ||||
| Internal Combustion Engine Model | ISUZU A-6BG1QC-02 | XI CHAI -- CA6110 | ||||
| engine type | Động cơ dầu | |||||
| Internal Combustion Engine Rated Output | kW/rpm | 82/2000 | 83/2000 | |||
| Internal Combustion Engine Rated Torque | Nm/rpm | 415/1400-1600 | 450/1400-1500 | |||
| Internal Combustion Engine Number of Cylinder | 6-105*125 | 6 | ||||
| Internal Combustion Engine Displanment | L | 6.494 | 7.127 | |||
| Internal Combustion Engine Fuel Tank Capacity | L | 140 | ||||
| Transmission Number of Speed Fwd/Bwd | 2/2- số tự động | |||||
XE NÂNG ĐIỆN CBS06-Z160 Semi
| Feature | ||||
| Model | CBS06 | CBS10 | CBS15 | |
| Configuration No. | Z160 | Z160 | Z160 | |
| Type | Narrow legs | |||
| Mast type | 2-Stage STD | |||
| Load capacity | kg | 650 | 1000 | 1500 |
| Standard lift height | mm | 1600/2500/3000 | 1600/2000/2500/3000/3500 | 1600/2000/2500/3000/3500 |
| Operating type | Walkie | |||
| Load center | mm | 500 | 500 | 500 |
| Wheels | ||||
| Fork wheel diameter | 80 | 80 | 80 | |
| Rear wheel diameter | 180 | 180 | 180 | |
| Dimension | ||||
| Lowered fork height | mm | 90 | 90 | 155/90 |
| Fork size(length/thickness) | mm | 1150(1000)160/60 | 1150(1000)160/60 | 1150(1000)160/60 |
| Outside width between legs | mm | - | - | - |
| Inside width between legs | mm | - | - | - |
| Outside width between forks | mm | 560/650/685 | 560/650/685 | 560/650/685 |
| Inside width between forks | 240/330/365 | 240/330/365 | 240/330/365 | |
| Overall length | mm | 1580 | 1580 | 1580 |
| Overall width | mm | 730 | 730 | 730 |
| Max extend height | mm | 2080/3027/3527 | 2080/2527 /3027/3527/4027 |
2080/2527 /3027/3527/4027 |
| Mast lowered height | mm | 2100/1820/2070 | 2100/1570/1820 /2070/2320/2570 |
2100/1570 /1820/2070/2320 |
| Min.Turning radius | mm | 1240 | 1240 | 1240 |
| Min.Aisle width for pallets 800×1220 | mm | 1890 | 1890 | 1890 |
| Min.Aisle width for pallets 1000×1220 | mm | 1932 | 1932 | 1932 |
| Min.ground clearance | 30 | 30 | 30 | |
| Performance | ||||
| Lift speed,laden/unladen | mm/s | 75/105 | 70/105 | 65/105 |
| Lowering speed,laden/unladen | mm/s | 135/70 | 145/80 | 155/90 |
| Electrical configuration | ||||
| motor | KW | 1.6 | 1.6 | 1.6 |
| Battery voltage/capacity | V | 12 | 12 | 12 |
| Battery capacity | Ah | 100 | 100 | 100 |
| Weight | ||||
| Battery weight | kg | 28 | 28 | 28 |
| Service weight with battery | kg | 340 | 360 | 390 |
XE NÂNG ĐIỆN CDD10-060
| Feature | ||
| Model | CDD10 | |
| Configuration No. | 060 | |
| Type | Narrow legs | |
| Mast type | 2-Stage STD | |
| Load capacity | 1000 | |
| Load center | kg | 600 |
| Wheel base | mm | 1285 |
| Operating type | mm | Walkie |
| Wheels | ||
| Wheel type | PU | |
| Wheel quantity Driving wheel /Balance wheel/Bearing wheel |
1/1/4 | |
| Dimension | ||
| Standard lift height | mm | 2000/2500 /3000/3300/3600 |
| Lowered fork height | mm | 90 |
| Fork size(length/width/thickness) | mm | 1150/(1220)/185/55 |
| Overall length | mm | 1898 |
| Overall width | mm | 806 |
| Max extend height | mm | 2385/2885 /3385/3685/3985 |
| mast lowered height | mm | 1550/1800 /2050/2200/2350 |
| Min.Turning radius | mm | 1475 |
| Min.Aisle width for pallets 800×1200 | mm | 2045 |
| Min.Aisle width for pallets 1000×1200 | mm | 2084 |
| Min,ground clearance | mm | 30 |
| Performance | ||
| Travel speed,laden/unladen | km/h | 3.5/4 |
| Lift speed,laden/unladen | mm/s | 130/230 |
| Lowering speed,laden/unladen | mm/s | 130/230 |
| Gradeability,laden/unladen | % | 5/7 |
| Electrical configuration | ||
| Drive motor / lift motor | KW | AC0.95/DC2.5 |
| Battery voltage | V | 24 |
| Battery capacity | Ah | 210 |
| Btake | Electromagnetic/Regenerative | |
| Controller | CURTIS | |
| Weight | ||
| Battery weight | kg | 190 |
| Service weight with battery | kg | 1010 |
XE NÂNG ĐIỆN CDD10-090
| Feature | ||
| Model | CDD10 | |
| Configuration No. | 090 | |
| Type | Wide legs | |
| Mast type | Single stage | |
| Load capacity | 1000 | |
| Load center | kg | 600 |
| wheel base | mm | 1134 |
| operating type | mm | Walkie |
| Wheels | ||
| wheel type | PU | |
| Wheel quantity Driving wheel Balance wheel/Bearing wheel |
1/1/2 | |
| Dimension | ||
| Standard lift height | mm | 1600/1950 |
| Max extend height | mm | 2055/2405 |
| Mast lowered height" | mm | 2055/2405 |
| Lowered fork height | mm | 55 |
| Fork size(length/width/thickness) | mm | 1070/100/40 |
| Overall length | mm | 1640 |
| Overall width | mm | 940 |
| Outside width between forks | mm | 200-812 |
| Inside width between forks" | mm | 0-612 |
| Min.Tuming radius | mm | 1344 |
| Min.Aisle width for pallets 800×1200 | mm | 1894 |
| Min.Aisle width for pallets 1000×1200 | mm | 1936 |
| Min.ground clearance | mm | 50 |
| Performance | ||
| Rravel speed,laden/unladen | km/h | 3/3.5 |
| Lift speed,laden/unlace | mm/s | 130/230 |
| Lowering speed,laden/unladen | mm/s | 130/230 |
| Gradeability,laden/unladen | % | 5/7 |
| Electrical configuration | ||
| Drive motor/Lift motor/Steering motor | KW | DC0.63/DC2.0 |
| Battery voltage | V | 24 |
| Battery capacity | Ah | 70 |
| Brake | Electromagnetic/Regenerative | |
| Controller | HELI(可选/Option:CURTIS) | |
| Weight | ||
| Battery weight | kg | 48 |
| Service weight with battery | kg | 458 |
XE NÂNG ĐIỆN CQDH13 14-850
| Feature | |||
| Model | CQDH13 | CQDH14 | |
| Configuration No. | 850 | 850 | |
| Type | Reach | Reach | |
| Mast type | 3-Stage STD | 3-Stage STD | |
| Load capacity | kg | 1300 | 1300 |
| Load center | mm | 500 | 500 |
| Wheel base | mm | 1478 | 1478 |
| Operating type | walkie | ||
| Wheels | |||
| Wheel type | PU | PU | |
| Wheel quantity Driving wheel /Balance wheel/Bearing wheel |
1/4 | 1/4 | |
| Dimension | |||
| Reach distance | mm | 0-550 | 0-550 |
| Standard lift height | mm | 3800/4000/4500/5000/5500 | 3800/4000/4500/5000/5500 |
| Max extend height | mm | 4991/5191/5691/6191/6691 | 4991/5191/5691/6191/6691 |
| Mast lowered height | mm | 1914/2081/2248/2415/2582 | 1914/2081/2248/2415/2582 |
| Lowered fork height | mm | 55 | 55 |
| Fork size(length/width/thickness) | 1070/100/40 | 1070/100/40 | |
| Overall length | mm | 2225 | 2225 |
| Overall width | mm | 1430 | 1430 |
| Outside width between forks | mm | 200-755 | 200-755 |
| distance shift fork side | 150 | - | |
| Tilt of fork (F/B) | mm | 4/3 | 4/3 |
| Min.Turning radius | mm | 1566 | 1566 |
| Min.Aisle width for pallets 800×1200 | mm | 2135 | 2135 |
| Min.Aisle width for pallets 1000×1200 | mm | 2315 | 2315 |
| Min.ground clearance | mm | 50 | 50 |
| Performance | |||
| Travel speed,laden/unladen | km | 3.5/4 | 3.5/4 |
| Lift speed,laden/unladen | mm/s | 130/230 | 130/230 |
| Lowering speed,laden/unladen | mm/s | 130/230 | 130/230 |
| Gradeability speed,laden/unladen | % | 3/5 | 3/5 |
| Electrical configuration | |||
| Drive motor/ Lift motor /Steering motor | KW | AC1.5/DC3.0/DC0.15 | AC1.5/DC3.0/DC0.15 |
| Battery voltage | V | 24 | 24 |
| Battery capacity | Ah | (Options:FAAM345) | (Options:FAAM345) |
| Brake | Electromagnetic/Regenerative | ||
| Controller | CURTIS | CURTIS | |
| Weight | |||
| Battery weight | kg | 300 | 300 |
| Service weight with battery | kg | 2420 | 2400 |