Model | CDD10 | |
Số cấu hình | 050 | |
Kiểu | Wide legs | |
loại mast | Stage STD | |
Sức nâng | kg | 1000 |
Trung tâm tải | mm | 600 |
Khoảng cách trục | mm | 1204 |
Phương thức thao tác | Walkie | |
Bánh xe | ||
Loại bánh xe ( trước sau) | PU | |
Số lượng bánh xe | 1/1/2 | |
Kích thước | ||
Chiều cao nâng tiêu chuẩn | mm | 2000/2500/3000/3300 |
Chiều cao nâng cao nhất của cột nâng | mm | 2387/2887/3387/3687 |
Chiều cao rút lại của cột nâng | mm | 1615/1865/2115/2265 |
Độ cao thấp nhất của càng nâng | mm | 55 |
khổ tiêu chuẩn càng nâng (dài,rộng,dày) | 1070/100/40 | |
Chiều dài xe | 1721 | |
Chiều rộng xe | mm | 940 |
Khoảng cách ngoài của càng nâng | mm | 200-812 |
Khoảng cách trong của càng nâng | mm | 0-612 |
Bán kính quay xe | mm | 1411 |
Khoảng cách tối thiểu đường đi (palet: 800×1200) |
mm | 1970 |
Khoảng cách tối thiểu đường đi (palet: 1000×1200) |
mm | 2010 |
Khoảng cách nhỏ nhất với nền nhà | mm | 50 |
Tính năng | ||
Tốc độ vận hành ( đầy tải / không tải) | km/h | 3/3.5 |
Tốc độ nâng lên ( đầy tải / không tải) | mm/s | 130/230 |
Tốc độ hạ xuống ( đầy tải / không tải) | mm/s | 130/230 |
Leo dốc ( đầy tải / không tải) | % | 5/7 |
Cấu hình điện | ||
Động cơ lái | KW | DC0.63/DC2.0 |
Bình điện | V | 24 |
dung lượng bình điện | Ah | 70 |
Phanh | Electromagnetic/Regenerative | |
Bộ điều khiển | HELI Option:CURTIS | |
trọng lượng | ||
trọng lượng bình điện | kg | 48 |
tổng trọng lượng ( gồm bình điện ) | kg | 596 |
XE NÂNG ĐIỆN CDD10-050
Feature | ||
Model | CDD10 | |
Configuration No. | 050 | |
Type | Wide legs | |
Mast type | Stage STD | |
Load capacity | kg | 1000 |
Load center | mm | 600 |
Wheel base | mm | 1204 |
Operating type | Walkie | |
Wheels | ||
Wheel type | PU | |
Wheel quantity Driving wheel /Balance wheel/Bearing wheel |
1/1/2 | |
Dimension | ||
Standard lift height | mm | 2000/2500/3000/3300 |
Max extend height | mm | 2387/2887/3387/3687 |
Mast lowered height” | mm | 1615/1865/2115/2265 |
Lowered fork height | mm | 55 |
Fork size(length/width/thickness) | 1070/100/40 | |
Overall length | 1721 | |
Overall width | mm | 940 |
Outside width between forks | mm | 200-812 |
Inside width between forks” | mm | 0-612 |
Min.Turning radius | mm | 1411 |
Min.Aisle width for pallets 800×1200 | mm | 1970 |
Min.Aisle width for pallets 1000×1200 | mm | 2010 |
Min.ground clearance | mm | 50 |
Performance | ||
Travel speed,laden/unladen | km/h | 3/3.5 |
Lift speed,laden/unladen | mm/s | 130/230 |
Lowering speed,laden/unladen | mm/s | 130/230 |
Gradeability,laden/unladen | % | 5/7 |
Electrical configuration | ||
Drive motor/ Lift motor /Steering motor | KW | DC0.63/DC2.0 |
Battery voltage | V | 24 |
Battery capacity | Ah | 70 |
Brake | Electromagnetic/Regenerative | |
Controller | HELI Option:CURTIS | |
Weight | ||
Battery weight | kg | 48 |
Service weight with battery | kg | 596 |
SKU:
12365
Category: Xe nâng điện -- Kho
Tags: ELECTRIC FORKLIFT, gia xe nang, xe nâng, xe nâng chất lượng, xe nang chl, xe nang dau, xe nang hang gia re, xe nang heli, xe nang trung quoc
Description
Shipping & Delivery
Related products
XE NÂNG DẦU 2.0T-3.5T
MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | |||||||||||
CHARACTER | |||||||||||
Manufacturer | ANHUI HELI CO., LTD | ||||||||||
Model | CPC20 | CPCD20 | CPC25 | CPCD25 | CPC30 | CPCD30 | CPC35 | CPCD35 | CPCD38 | ||
Power unit | Diesel | ||||||||||
Rated Capacity | kg | 2000 | 2500 | 3000 | 3500 | 3800 | |||||
Load Center | mm | 500 | |||||||||
Operation | Driver Seated | ||||||||||
SIZE | |||||||||||
max.lifting heigh | h3 | mm | 3000 | 3000 | 3000 | 3000 | 3000 | ||||
height mast retracted (upright) | h1 | mm | 1995 | 1995 | 2070 | 2180 | |||||
overall max.lifting height (with backrest) | h4 | mm | 4030 | 4030 | 4262 | 4262 | |||||
free lift height | h2 | mm | 170 | 170 | 160 | 170 | 150 | ||||
overall height (overhead guard) | h6 | mm | 2070 | 2070 | 2090 | 2090 | 2195 | ||||
min.ground clearance under mast | m1 | mm | 110 | 110 | 135 | 135 | |||||
overhead guard clearance (from face of seat) | h7 | mm | 1000 | ||||||||
coupler height | h5 | mm | 290 | 290 | 310 | 310 | |||||
backrest height (from upper face of forks | h8 | mm | 995 | 995 | 1227 | 1222 | |||||
overall length (without forks) | (L1/L2) | mm | 3422/2502 | 3646/2576 | 3752/2682 | 3763/2693 | 3954/2884 | ||||
wheel base | L5 | mm | 1600 | 1600 | 1700 | 1700 | 1900 | ||||
front overhang | X | mm | 477 | 477 | 479 | 498 | 498 | ||||
rear overhang | L4 | mm | 420 | 494 | 495 | 495 | 495 | ||||
overall width | B | mm | 1170 | 1170 | 1225 | 1225 | |||||
tread (front/rear) | (S/P) | mm | 970/970 | 970/970 | 1000/970 | 1000/970 | 1000/970 | ||||
lateral fork adjustment outside of fork (max./min.) | R | mm | 1030/244 | 1030/244 | 1060/250 | 1060/250 | |||||
outside turning radius | V | mm | 2170 | 2240 | 2400 | 2420 | |||||
Inside turning radius | Wa | mm | 160 | 160 | 200 | 200 | |||||
min.intersecting aisle | Ra | mm | 2200 | 2200 | 2380 | 2400 | |||||
tilting angles (forward) | α/β | % | 6° / 12° | ||||||||
fork dimensions (axbxc) | a x b x c | mm | 920x122x40 | 1070x122x40 | 1070x125x45 | 1070x125x50 | 1070x125x50 | ||||
PERFORMANCE | |||||||||||
max.traveling speeds (with/without load) | Km/h | 17/19 | 17/19 | 18/19 | 19/19 | ||||||
lifting speeds (with/without load | mm/s | 530/550 | 530/550 | 440/480 | 330/370 | ||||||
lowering speeds(with/without load) | mm/s | 450/550 | 450/550 | 450/500 | 350/400 | ||||||
max.draw-bar pull,(with/without load) | kN | 20/15 | 21/15 | 20/15.2 | 21/15.2 | 20/16 | 21/16 | 20/16.3 | 21/16.3 | ||
max.negotiable gradient(without load) | % | 21/20 | 27/20 | 18/20 | 23/20 | 20/20 | 20/20 | 15/20 | 10.5/20 | ||
WEIGHT | |||||||||||
service mass | kg | 3320 | 3680 | 4270 | 4700 | 4850 | |||||
load wheel with load(front/rear) | kg | 4788/532 | 5562/618 | 6543/727 | 7380/820 | ||||||
load wheel without load(front/rear) | kg | 1328/1992 | 1472/2208 | 1708/2562 | 1880/2820 | ||||||
WHEEL AND TYRE | |||||||||||
wheels number front/rear(x=driven) | 2X/2 | ||||||||||
Tyre type | 实心轮胎 | ||||||||||
Tyre sive | 7.00-12- /6.00-9 | 28x9-15 /6.50-10 | |||||||||
Service Brake | Hydraulic-Foot Pedal / 液压-踏板式 | ||||||||||
Paking Brake | Mechanical-Hand Lever / 机械-手动式 | ||||||||||
DRIVE AND CONTROL DEVICE | |||||||||||
Battery (Voltage/Capacity) | V/Ah | 12/80 | 12/80 | ||||||||
Internal Combustion Engine Model | Mitsubisi S4S | DA CHAI CA498-97 | |||||||||
Internal Combustion Engine Rated Output | kW/rpm | 35.3KW/2250rpm | 45KW/2500rpm | ||||||||
Internal Combustion Engine Rated Torque | Nm/rpm | 177Nm/1700rpm | 170~180Nm/1600~1800rpm | ||||||||
Internal Combustion Engine Number of Cylinder | 4-94 | 4-98 | |||||||||
Internal Combustion Engine Displacement | L | 120mm/3.331 L | 105/3.168 L | ||||||||
Transmission Number of Speed Fwd/Bwd type | 自动 Tự động / 手动 số sàn | 自动 Tự động / 手动 số sàn |
XE NÂNG DẦU 1.0T-1.8T
MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | ||||||||
CHARACTER | ||||||||
Manufacturer | ANHUI HELI CO., LTD | |||||||
Model | CPC10 | CPCD10 | CPC15 | CPCD15 | CPC18 | CPCD18 | ||
Power unit | Diesel | |||||||
Rated Capacity | kg | 1000 | 1500 | 1750 | ||||
Load Center | mm | 500 | ||||||
Operation | Driver Seated | |||||||
SIZE | ||||||||
overall max.lifting height (with backrest) | h4 | mm | 4030 | 4030 | 4030 | |||
max.lifting heigh | h3 | mm | 3000 | |||||
height mast retracted (upright) | h1 | mm | 1995 | 1995 | 1995 | |||
free lift height | h2 | mm | 152 | 155 | 155 | |||
backrest height (from upper face of forks | h8 | mm | 1008 | 1005 | 1005 | |||
overhead guard clearance (from face of seat) | h7 | mm | 1025 | |||||
overall height (overhead guard) | h6 | mm | 2070 | 2070 | 2070 | |||
overall length (with forks) | L1 | mm | 2941 | 3165 | 3213 | |||
overall length (without forks) | L2 | mm | 2171 | 2245 | 2293 | |||
front overhang | X | mm | 418 | 421 | 465 | |||
rear overhang | L4 | mm | 350 | 420 | 465 | |||
wheel base | L5 | mm | 1400 | 1400 | 1400 | |||
coupler height | H5 | mm | 250 | 250 | 250 | |||
min.ground clearance under mast | m1 | mm | 110 | 110 | 110 | |||
overall width | B | mm | 1070 | 1070 | 1070 | |||
lateral fork adjustment outside of fork (max./min.) | S | mm | 950/200 | |||||
tread (front) | R | mm | 890 | 890 | 920 | |||
tread (rear) | P | mm | 920 | 920 | 920 | |||
outside turning radius | Wa | mm | 1880 | 1955 | 1985 | |||
Inside turning radius | V | mm | 110 | 110 | 95 | |||
min.intersecting aisle | Ra | mm | 1977 | 2052 | 2093 | |||
tilting angles (forward) | α/β | 6° / 12° | ||||||
fork dimensions (axbxc) | mm | 770x100x32 | 920x100x35 | 920x100x35 | ||||
PERFORMANCE | ||||||||
max.traveling speeds (with/without load) | Km/h | 13.5/14.5 | ||||||
lifting speeds (with/without load | mm/s | 590/650 | ||||||
lowering speeds(with/without load) | mm/s | 450/550 | ||||||
max.draw-bar pull,(with/without load) | kN | 12.3/7 | 18/7 | 12.3/7 | 18/7 | 12.3/7 | 18/7 | |
max.negotiable gradient(without load) | % | ≥20 | ||||||
WEIGHT | ||||||||
service mass | kg | 2220 | 2660 | 2890 | ||||
load wheel with load(front/rear) | kg | 2830/390 | 3640/520 | 4040/600 | ||||
load wheel without load(front/rear) | kg | 1220/1000 | 1170/1490 | 1140/1750 | ||||
WHEEL AND TYRE | ||||||||
wheels number front/rear(x=driven) | 2X/2 | |||||||
Tyre type | Solid tires | |||||||
Tyre sive(front) | 6.50-10 | |||||||
Tyre sive(rear) | 5.00-8 | |||||||
Service Brake | Hydraulic-Foot Pedal / 液压-踏板式 | |||||||
Paking Brake | Mechanical-Hand Lever / 机械-手动式 | |||||||
DRIVE AND CONTROL DEVICE | ||||||||
Battery (Voltage/Capacity) | V/Ah | 12/80 | ||||||
Internal Combustion Engine Model | ISUZU C240PKJ | |||||||
Internal Combustion Engine Rated Output | kW/rpm | 35.4/2500 | ||||||
Internal Combustion Engine Rated Torque | Nm/rpm | 139.9/1800 | ||||||
Internal Combustion Engine Number of Cylinder | 4-86×102 | |||||||
Internal Combustion Engine Displacement | L | 2.369 | ||||||
Internal Combustion Engine Fuel Tank Capacity | L | 38 | ||||||
Transmission Number of Speed Fwd/Bwd type | 1-1Power Shift Shift Shift T/M,2-2 Manual Shift T/M |
XE NÂNG ĐIỆN CBS06-Z160 Semi
Feature | ||||
Model | CBS06 | CBS10 | CBS15 | |
Configuration No. | Z160 | Z160 | Z160 | |
Type | Narrow legs | |||
Mast type | 2-Stage STD | |||
Load capacity | kg | 650 | 1000 | 1500 |
Standard lift height | mm | 1600/2500/3000 | 1600/2000/2500/3000/3500 | 1600/2000/2500/3000/3500 |
Operating type | Walkie | |||
Load center | mm | 500 | 500 | 500 |
Wheels | ||||
Fork wheel diameter | 80 | 80 | 80 | |
Rear wheel diameter | 180 | 180 | 180 | |
Dimension | ||||
Lowered fork height | mm | 90 | 90 | 155/90 |
Fork size(length/thickness) | mm | 1150(1000)160/60 | 1150(1000)160/60 | 1150(1000)160/60 |
Outside width between legs | mm | - | - | - |
Inside width between legs | mm | - | - | - |
Outside width between forks | mm | 560/650/685 | 560/650/685 | 560/650/685 |
Inside width between forks | 240/330/365 | 240/330/365 | 240/330/365 | |
Overall length | mm | 1580 | 1580 | 1580 |
Overall width | mm | 730 | 730 | 730 |
Max extend height | mm | 2080/3027/3527 | 2080/2527 /3027/3527/4027 |
2080/2527 /3027/3527/4027 |
Mast lowered height | mm | 2100/1820/2070 | 2100/1570/1820 /2070/2320/2570 |
2100/1570 /1820/2070/2320 |
Min.Turning radius | mm | 1240 | 1240 | 1240 |
Min.Aisle width for pallets 800×1220 | mm | 1890 | 1890 | 1890 |
Min.Aisle width for pallets 1000×1220 | mm | 1932 | 1932 | 1932 |
Min.ground clearance | 30 | 30 | 30 | |
Performance | ||||
Lift speed,laden/unladen | mm/s | 75/105 | 70/105 | 65/105 |
Lowering speed,laden/unladen | mm/s | 135/70 | 145/80 | 155/90 |
Electrical configuration | ||||
motor | KW | 1.6 | 1.6 | 1.6 |
Battery voltage/capacity | V | 12 | 12 | 12 |
Battery capacity | Ah | 100 | 100 | 100 |
Weight | ||||
Battery weight | kg | 28 | 28 | 28 |
Service weight with battery | kg | 340 | 360 | 390 |
XE NÂNG DẦU 4.0T-5.0T
MANUFACTURER'S DATA AND DESIGN CHARACTERISTICS | |||||
CHARACTER | |||||
Manufacturer | ANHUI HELI CO., LTD | ||||
Model | CPCD40-M2 | CPCD45-M2 | CPCD50-M2 | ||
Power type | Diesel | ||||
Rated Capacity | kg | 4000 | 4500 | 5000 | |
Load Center | mm | 500 | |||
Driving mode | Driver Seated | ||||
SIZE | |||||
Mast height, extended (with backrest,unloaded) | H | mm | 4250 | ||
max. Fork height | H1 | mm | 3000 | ||
mast height,lowered | H2 | mm | 2275 | ||
free lift | H4 | mm | 150 | ||
backrest height (from the fork surface | H3 | mm | 1250 | ||
Overhead guard cleanrance ( from face of seat ) | H6 | mm | 1020 | ||
overall height (overall height) | H8 | mm | *2350/2270/2230 | ||
overall length (fork/without fork) | L/L` | mm | 4140/3080 | 4170/3100 | 4364/3144 |
Front overhang | L2 | mm | 560 | ||
Rear overhang | L4 | mm | 520 | 540 | 584 |
Wheel base | L3 | mm | 2000 | ||
Couper height | H7 | mm | 380 | ||
min.ground clearance under mast | H5 | mm | 175 | ||
overall Width | W1 | mm | 1480 | ||
Fork dimensions (external)(max./min.) | W2 | mm | 1340/300 | ||
tread (front tread/rear tread) | W3/W4 | mm | 1180/1190 | ||
Min.Turning radius (inside) | r' | mm | 220 | ||
Min.Turning radius (outside) | r | mm | 2720 | 2740 | 2800 |
min.Right angle angle aisle width | Ra | mm | 2480 | 2500 | 2550 |
Mast tilting angle (feont/rear) | α/β | % | 6° / 12° | ||
Fork size | L1xWxT | mm | 1070x150x50 | ||
PERFORMANCE | |||||
max.traveling speed (loaded/unloaded) | Km/h | 24/25 | |||
lifting speeds (loaded/unloaded) | mm/s | 460/520 | |||
lowering speeds(loaded/ unloaded) | mm/s | 300 < < 600 | |||
max.Draw bar (loaded/unloaded) | kN | 30/18 | |||
max.Gradeability(loaded/unloaded) | % | 20/20 | |||
WEIGHT | |||||
service weight | kg | 6310 | 6510 | 6760 | |
Weight distribution loaded(front/rear) | kg | 8925/1575 | 9750/1550 | 10500/1600 | |
Weight distribution unloaded (front/rear) | kg | 2700/3800 | 2710/4090 | 2680/4420 | |
WHEEL AND TYRE | |||||
Tyre number ×=drive wheel (front/rear) | 2X/2 | ||||
Tyre type (front/rear) | Solid tires | ||||
Tyre size (front/rear) | 8.25-15 / 7.00-12 | 300-15 / 7.00-12 | |||
Double tyre size (front/rear) | 8.25-15 / 7.00-12 | ||||
Service Brake | Hydraulic-foot pedal | ||||
Paking Brake | Mechanical-hand brake lever type | ||||
DRIVE AND CONTROL DEVICE | |||||
Battery (Voltage/Capacity) | V/Ah | 24/80 | |||
Engine manufacturer /model | Xi Chai -- CA4110 | Mitsubishi S6S-230 | |||
engine rated power | kW/rpm | 61/2200 | 52/2300 | ||
engine rated torque | Nm/rpm | 305/1400~1600 | 248/1700 | ||
Engine cylinder (number-bore ×stoke) | 4-110 x 125 | 6-94×120 | |||
engine displacement | L | 4.752 | 4.966 | ||
Engine fuel tank capacity | L | 90 | |||
Gear number (front/rear) | 2-1 powered shift |
NÂNG HÀNG PALLET CBD20-150
Feature | ||
Model | CBD20 | |
Configuration No. | 150 | |
load capacity | kg | 2000 |
Load center | mm | 600 |
wheel base | mm | 1390 |
operating type | Walkie | |
Wheels | ||
wheel type | PU | |
Wheel quantity Driving wheel Balance wheel/Bearing wheel |
1/1/4 | |
Driving wheel size | mm | ¢ 248×75 |
Bearing wheel size | mm | ¢ 80×80( Double wheels) |
Balance wheelsize | mm | ¢ 115x55 |
Dimension | ||
Max.fork lowered height | mm | 85 |
Max.fork lifting height | mm | 195 |
Max.lifting height | mm | 110 |
Overall fork width | mm | 540/600/650/685 |
Inside width between forks | mm | 170/230/280/315 |
Fork length | mm | 1150/1200 |
Fork width | mm | 185 |
Fork thickness | mm | 55 |
Overall length | mm | 1750 |
Overall width | mm | 720 |
Overall height(With handle) | mm | 1385 |
Overall height(Without handle) | mm | 850 |
Min.Turning radius | mm | 1575 |
Min.Aisle width for pallets 800×1200 | mm | 1900 |
Min.Aisle width for pallets 1000×1200 | mm | 1940 |
Performance | ||
Travel speed,laden/unladen | km/h | 4/4 |
Lift speed,laden/unladen | mm/s | 56/60 |
Lowering speed,laden/unladen | mm/s | 57/59 |
Gradeability,laden/unladen | % | 5/7 |
Electrical configuration | ||
Drive motor | KW | AC 1.5 |
Lift motor | KW | DC 1.2 |
Steering motor | KW | DC 0.15 |
Battery voltage/capacity | V/Ah | 24/210 |
Brake | Electromagnetic/Regenerative | |
Controller | CURTIS | |
Weight | ||
Battery weight | kg | 190 |
Service weight with battery | kg | 600 |
XE NÂNG ĐIỆN CQDH13 14-850
Feature | |||
Model | CQDH13 | CQDH14 | |
Configuration No. | 850 | 850 | |
Type | Reach | Reach | |
Mast type | 3-Stage STD | 3-Stage STD | |
Load capacity | kg | 1300 | 1300 |
Load center | mm | 500 | 500 |
Wheel base | mm | 1478 | 1478 |
Operating type | walkie | ||
Wheels | |||
Wheel type | PU | PU | |
Wheel quantity Driving wheel /Balance wheel/Bearing wheel |
1/4 | 1/4 | |
Dimension | |||
Reach distance | mm | 0-550 | 0-550 |
Standard lift height | mm | 3800/4000/4500/5000/5500 | 3800/4000/4500/5000/5500 |
Max extend height | mm | 4991/5191/5691/6191/6691 | 4991/5191/5691/6191/6691 |
Mast lowered height | mm | 1914/2081/2248/2415/2582 | 1914/2081/2248/2415/2582 |
Lowered fork height | mm | 55 | 55 |
Fork size(length/width/thickness) | 1070/100/40 | 1070/100/40 | |
Overall length | mm | 2225 | 2225 |
Overall width | mm | 1430 | 1430 |
Outside width between forks | mm | 200-755 | 200-755 |
distance shift fork side | 150 | - | |
Tilt of fork (F/B) | mm | 4/3 | 4/3 |
Min.Turning radius | mm | 1566 | 1566 |
Min.Aisle width for pallets 800×1200 | mm | 2135 | 2135 |
Min.Aisle width for pallets 1000×1200 | mm | 2315 | 2315 |
Min.ground clearance | mm | 50 | 50 |
Performance | |||
Travel speed,laden/unladen | km | 3.5/4 | 3.5/4 |
Lift speed,laden/unladen | mm/s | 130/230 | 130/230 |
Lowering speed,laden/unladen | mm/s | 130/230 | 130/230 |
Gradeability speed,laden/unladen | % | 3/5 | 3/5 |
Electrical configuration | |||
Drive motor/ Lift motor /Steering motor | KW | AC1.5/DC3.0/DC0.15 | AC1.5/DC3.0/DC0.15 |
Battery voltage | V | 24 | 24 |
Battery capacity | Ah | (Options:FAAM345) | (Options:FAAM345) |
Brake | Electromagnetic/Regenerative | ||
Controller | CURTIS | CURTIS | |
Weight | |||
Battery weight | kg | 300 | 300 |
Service weight with battery | kg | 2420 | 2400 |